Find More Job& !!!

Fiberglass Laminator and Fabricator, United Arab Emirates

No Comments
Job Title: Fiberglass Laminator and Fabricator
Job Location: Abu Dhabi, United Arab Emirates 
Company: Automotive
Date Posted: 24 - October - 2017
Requirements:
  • Apply lacquers and waxes to mold surfaces to facilitate assembly and removal of laminated parts.
  • Apply layers of plastic resin to mold surfaces prior to placement of fiberglass mats, repeating layers until products have the desired thicknesses and plastics have jelled.
  • Bond wood reinforcing strips to decks and cabin structures of watercraft, using resin-saturated fiberglass.
  • Check all dies, templates, and cutout patterns to be used in the manufacturing process to ensure that they conform to dimensional data, photographs, blueprints, samples, and/or customer specifications.
  • Check completed products for conformance to specifications and for defects by measuring with rulers or micrometers, by checking them visually, or by tapping them to detect bubbles or dead spots.
  • Cure materials by letting them set at room temperature, placing them under heat lamps, or baking them in ovens.
  • Inspect, clean, and assemble molds before beginning work.
  • Mask off mold areas which are not to be laminated, using cellophane, wax paper, masking tape, or special sprays containing mold-release substances.
  • Mix catalysts into resins, and saturate cloth and mats with mixtures, using brushes.
  • Pat or press layers of saturated mat or cloth into place on molds, using brushes or hands, and smooth out wrinkles and air bubbles with hands or squeegees.
  •  Release air bubbles and smooth seams, using rollers.
  • Repair or modify damaged or defective glass-fiber parts, checking thicknesses, densities, and contours to ensure a close fit after repair.
  • Select precut fiberglass mats, cloth, and woodbracing materials as required by projects being assembled.
  • Spray chopped fiberglass, resins, and catalysts onto prepared molds or dies using pneumatic spray guns with chopper attachments.
  • Trim cured materials by sawing them with diamond-impregnated cutoff wheels.
  • Trim excess materials from molds, using hand shears or trimming knives.

Contact Form

Name

Email *

Message *